The high series brings to market the latest in inverter technology with a unique design for an easy and economical setup and operation. The series brings a broad operating range in cooling and heating modes from –25C(13F) to 50C (122F), with very fast cooling and heating capability. Sleep mode also helps the High series reduce the energy consumption overnight by up to 60% so you can sleep without worrying about the energy bill.
MODEL NO. MSABB-12HRFN1-MT0W + MOB30-12HFN1-MT0W
Extra Low Temperature Heating
When it’s cold outside it’s warm inside. Premier ductless systems can be used as a primary heat source, with heat output down to -13°F (-25°C).
Chassis Heating Belt
Heating belt is fitted on the base plate of the outdoor unit to prevent water accumulation, which improves heat transfer efficiency.
Compressor Heating Belt
Heating belt is fitted on the compressor to prevent frosting water accumulation, which improves heat transfer efficiency
Low Ambient Cooling
Even when its cold outside, but warm inside, the air conditioner will keep the area cool—perfect for server rooms and commercial kitchens.
Connections, piping and drainage can be installed from both the left and right sides.
Set the unit to start and stop automatically in a 24-hour period.
Prevents evaporator from freezing and maintains dehumidifying effect in low temperature environments.
Auto Restart Function
If the air conditioner shuts off unexpectedly due to a power outage, it will restart with the previous settings automatically when the power resumes.
Easy maintenance with the electric box right inside the unit. The integrated design provides a more compact size for easier installation.
Follow Me (Remote Thermostat)
Temperature sensor built into the remote controller will sense its surrounding temperature. The unit will adjust the room temperature more accurately to give you comfort.
With the Inverter, the outdoor unit uses only the energy required to meet the desired temperature requirements of the indoor unit, thus lowering electric bills.
Louver Position Memory
Horizontal louver will automatically move to the same position as set the last time the unit was turned on.
Refrigerant Leak Detection
Indoor unit shows error code “EC” and stops automatically when refrigerant leakage is detected. This protects the compressor from high temperature damage due to refrigerant leakage.
The function enables the air conditioner to automatically increase cooling or decrease heating by round 4 degrees for the first two hours, then holds steady for the next 5 hours, before switching off. This function achieves both energy saving and comfort at night.
Wired Remote Control (optional)
Compared with an infrared remote controller, a wired controller can be fixed on the wall and makes air conditioner operation more convenient for larger setups .